{"id":3388,"date":"2022-09-02T17:22:23","date_gmt":"2022-09-02T08:22:23","guid":{"rendered":"https:\/\/barcodemanager.azurewebsites.net\/?page_id=3388"},"modified":"2022-09-02T17:22:23","modified_gmt":"2022-09-02T08:22:23","slug":"6-1-2","status":"publish","type":"page","link":"https:\/\/barcodemanager.azurewebsites.net\/en\/windows\/docs\/6-1-2\/","title":{"rendered":"6.1.2 Scan rate"},"content":{"rendered":"\n
\n
\n
\"Pro\"<\/figure><\/div><\/div>\n\n\n\n
\n

<\/p>\n<\/div>\n<\/div>\n\n\n\n

Sets the scan speed for camera reading. The scan speed is the frequency at which barcodes in the camera image are scanned.<\/p>\n\n\n\n

The scanning speed can be selected from “Auto”, “High”, “Middle”, and “Low”.<\/p>\n\n\n\n

When set to “Low,” the barcode reading response is reduced, but the application can run at lower power. If set to “Auto”, the scan will be dependent on the number of frames from the camera.<\/p>\n\n\n\n

First, open the app\u2019s settings screen. In the tab at the top of the app, select
\"\"\u201cSettings\u201d to display the settings screen.<\/p>\n\n\n\n

Then, on the Settings screen, in the Camera<\/strong> section, click \u201cScan Rate<\/strong>\u201d and select the scan speed you want to set.<\/p>\n\n\n

\n
\"\"
Scan Rate window<\/em><\/figcaption><\/figure><\/div>\n\n\n

Press the OK button to save the settings.<\/p>\n\n\n\n

*If the application is running in low power mode, the scan speed is set to “Low”.<\/p>\n\n\n\n

<\/div>\n\n\n